Product Code: 50672

 

3-Fan Overhead Ionizer

Neutralizes electrostatic charges on insulators and ungrounded conductors in a 2’ x 5’ coverage area.

 

Fast Decay Times (< 3 seconds at 18”)

Discharges (removes) both positive and negative electrostatic charges within the coverage area.

 

±3 Volt Offset Voltage Balance

Exceeds required limits of ANSI/ESD S20.20 and ESD TR53.

 

Dedicated High Voltage Power Modules with Balance Control at Each Fan

Allows each fan to be tuned to produce the optimum decay and balance in the coverage area.

 

Sealed Plenum Air Flow

Prevents contamination from being introduced to workstation.

 

Steady State DC Emitters

Spaced farther apart to prevent ion recombination, increase decay efficiency, and provide a broader coverage area of ionization.

 

Solid Tungsten Emitters

Maintains sharp point for optimal ionizer performance. Resists oxidation, melting and other damage that dulls the tip of the emitter 

 

9 Speed Fan (195 to 300CFM)

Consistent performance at all speeds.  Low airflow may be used when working with small moving parts and components that may move with higher airflow.

 

Shielded Bearings

Retains lubricant and minimizes contamination in the work area.

 

Stainless Steel Housing

Minimizes foreign objects debris, corrosion, and other contaminations when used in clean or sensitive areas.

 

SIM Compatible

Connect to EMIT’s SIM (Smart Ionization & Monitoring) software to monitor and record the activity of the ionizer.

 

NIST Calibrated with Certificate

Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology.  

 

Made in USA