Click image to enlarge
ESD Mat | T2 Series Dual Layer Rubber Mat
Pre-cut the mat to fit your size requirements
Installed with ground accessories
Dissipative Dual Layer Rubber Material
Provides a worksurface that does not generate a static charge and will control the discharge rate from all conductors (including ESD susceptible items) that are placed on the surface.
Dissipative (1 x 106 to <1 x 109 ohms Rtt) Top Layer
Meets ANSI/ESD S20.20 worksurface required limit and recommendation of ANSI/ESD S4.1 for contact with ESD susceptible items. Electricals will not drift for the life of the mat.
Conductive (<1 x 104 Rtt) Bottom Layer
The dedicated conductive layer reduces the resistance to ground (Rtg) from the top of the surface to the groundable point ground and allows the mats to be used with ESD workstation monitors. Electricals will not drift for the life of the mat.
High Strength Nitrile Rubber Compound
Designed to withstand abrasion, stretching, and tearing and may be used in soldering applications with flux and other chemicals. Click Here for Chemical Resistance Chart
Ultraviolet (UV) Stabilizer Additives
Stabilizes color retention, insures ESD performance over time and eliminates surface layer deterioration resulting in cracking when the product is flexed.
Provides consistent electrical performance regardless of ambient humidity
Lot Traceability Information
Provides tracking information for lifespan of the product and to ensure quality control.
Lead-free RoHS compliant
Made in USA
66070, 66080, 66081, 66075, 66085, 66086, 66095, 66100, 66101