Products

Company Info

Product News

 

Terms and Conditions

Dual Wire Continuous Workstation Monitor

Product Code: 19662

Dual Station Continuous Monitor for 2 Operators And 2 Worksurfaces
Continuously monitors the path-to-ground integrity of two operators and two ESD worksurfaces independently

<1 Second Alarm Response Time
Identifies failures and intermittencies that inferior technologies miss

Adjustable Operator Test Limits and Voltages
Use to meet the testing requirements of ANSI/ESD S20.20 or other standards

Replaceable Operator Remote Kits with 3.5 Mono Jacks and Auxiliary Banana Jacks
Replaces the black and white operator remotes should their jacks become worn

Compatibility with Dual-Wire Wrist Straps
Meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-0

Calibration Verification
Use the Desco 50524 Dual-Wire Monitor Limit Comparator to check the test limits of Dual-Wire Dual Operator Monitors without removing them from their workstations

NIST Calibrated with Certificate Included
Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on the calibration of Desco products, see Calibration.

100-240VAC Power Adapter with North American Plug
Works with standard electrical systems in North America, United Kingdom, Japan, Asia and Europe

Made in the United States of America
This item is made and stocked in Chino, CA

 

*The ESDA Wrist Strap standard is ANSI/ESD S1.1. The Wrist Strap System required limit per ANSI/ESD S20.20 Table 3 is 0.8 to 1.2 x 106 ohms with product qualification testing per ANSI/ESD S1.1. The test range of the monitored circuit is 500 kilohms to 10 megohms.

Click image to enlarge